主题：ASTM目录：第九部分

第九部分

ASTM D 3801-1996 测量在垂直状态下实芯塑料的对比熄灭特性的方法 Test Method for Measuring the Comparative Extinguishing Characteristics of Solid Plastics in a Vertical Position
ASTM D 2319-1998 硬沥青软化点的试验方法(空气中立方块试验法) Test Method for Softening Point of Pitch (Cube-in-Air-Method)
ASTM A 476-1990 造纸厂干燥辊用球墨可锻铸铁件 Ductile Iron Castings for Paper Mill Dryer Rolls
ASTM D 5662-1999 测定汽车齿轮油与典型油密封弹性体相适应性的标准试验方法 Standard Test Method for Determining Automotive Gear Oil Compatability with Typical Oil Seal Elastomers
ASTM D 5901-1999 航空燃料冻结点的标准试验方法(自动光学方法) Standard Test Method for Freezing Point of Aviation Fuels (Automated Optical Method)
ASTM A 27/A 27M-1995 通用碳素钢铸件 Steel Castings, Carbon for General Application
ASTM A 744/A 744M-1996 严酷条件下使用的耐腐蚀镍铬铁合金铸件 Castings, Iron-Chromium-Nickel, Corrosion Resistant for Severe Service
ASTM D 1929-1996 塑料引燃性能的测试方法 Test Method for Ignition Properties of Plastics
ASTM D 1712-1996 塑料抗硫化物污染 Resistance of Plastics to Sulfide Staining
ASTM D 6443-1999 波长色散X射线荧光光谱法测定未用润滑油和添加剂中钙、氯、铜、镁、磷、硫和锌的试验方法(数学修正程序) "Standard Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc, in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)
"
ASTM F 1795-1997 空气或氮气系统减压阀标准规范 Standard Specification for Pressure-Reducing Valves for Air or nitrogen Systems
ASTM D 4636-1999 液压油、飞机涡轮发动机润滑油和其他高精炼油的腐蚀性和氧化稳定性的试验方法 Standard Test Method for Corrosiveness and Oxidation qualility of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
ASTM D 2068-1997 馏出燃料油的过滤器阻塞倾向的试验方法 Test Method for Filter Blocking Tendency of Distillate Fuel Oils
ASTM D 1747-1999 粘性材料折射指数的测试方法 Test Method for Refractive Index of Viscous Materials
ASTM D 5870-1995 计算塑料牢固性参数指数的标准规程 Standard Practice for Calculating Property Retention Index of Plastics
ASTM D 1835-1997 液化石油(LP)气 Liquefied Petroleum (LP) Gases
ASTM F 667-1997 大直径波纹聚乙烯管及配件 Large Diameter Corrugated Polyethylene Tubing and Fittings
ASTM D 1321-1997 石油蜡针入度的试验方法 Test Method for Needle Penetration of Petroleum Waxes
ASTM D 1266-1998 石油产品中硫的试验方法(燃灯法) Test Method for Sulfur in Petroleum Products (Lamp Method)
ASTM F 541-1990 合金钢有眼螺栓 Alloy Steel Eyebolts
ASTM D 6423-1999 测定酒精、变性燃料酒精和燃料酒精pH值的标准试验方法 Standard Test Method for Determination of pH of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)
ASTM D 5134-1998 用毛细管气相色谱法详细分析石脑油穿透n壬烷的试验方法 Test Method for Detailed Analysis of Petroleum Naphthas Through n-Nonane by Capillary Gas Chromatography
ASTM D 4054-1993 添加剂与航空涡轮机燃料和飞机燃烧体系材料相容性的评价 Evaluating the Compatibility of Additives with Aviation-Turbine Fuels and Aircraft Fuel System Materials
ASTM D 3552/D 3552M-1996 纤维增强金属基质复合物的拉伸特性的试验方法 Test Method for Tensile Properties of Fiber-Reinforced Metal Matrix Composites
ASTM D 3703-1999 测定航空燃气涡轮发动机用燃料过氧化值的试验方法 Test Method for Peroxide Number of Aviation Turbine Fuels
ASTM PS 84-1996 螺纹连接软油箱箱座安全规范(暂定) Provisional Safety Specification for Bean Bag Chairs
ASTM D 3948-1999 用便携式分离器测定航空涡轮机燃料的水分离特性的试验方法 Test Methods for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
ASTM D 3606-1999 气相色谱法测定成品摩托车和飞机汽油中苯和甲苯含量的试验方法 Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography
ASTM D 4628-1997 原子吸收光谱法分析未用润滑油中钡、钙、镁和锌的试验方法 Test Method for Analysis of Barium, Calcium, Magnesium and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
ASTM D 3749-1995 用气体色谱液筒底间隙技术测定聚氯乙烯均聚物树脂中残余氯乙烯单体的试验方法 Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
ASTM D 4952-1997 燃料和溶剂中活性硫化物的定量分析标准试验方法 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
ASTM F 1393-1992 用带汞探针的铣床回授靠模工具机测量器测定硅中净载流子密度的测试方法 Test Method for Determining Net Carrier Density in Silicon Wafers by Miller Feedback Profiler Measurements with a Mercury Probe
ASTM A 922-1993 硅金属标准规范 Standard Specification for Silicon Metal
ASTM D 6375-1999 用热重分析仪(TGA)Noack法测定润滑油蒸发损失的标准试验方法 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method
ASTM F 976-1999 用户使用的便携式煤油容器 Portable Kerosine Containers for Consumer Use
ASTM D 2156-1994 燃料馏分燃烧产生的烟道气中烟密度的测试方法 Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels
ASTM B 611-1985 硬质合金的耐磨性的试验方法 Test Method for Abrasive Wear Resistance of Cemented Carbides
ASTM A 342-1995 磁铁材料导磁率的试验方法 Test Methods for Permeability of Feebly Magnetic Materials
ASTM F 1058-1997 外科植入物用煅制钴-铬-镍-钼-铁合金 Wrought Cobalt-Chromium-Nickel-Molybdenum-Iron Alloy for Surgical Implant Applications
ASTM D 6352-1998 用气相色谱法测试174℃-700℃沸腾范围内石油馏出物沸腾范围分布的标准试验方法 Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700&*176C by Gas Chromatography
ASTM D 6335-1998 通过热氧化发动机油模拟试验测定高温沉积物的标准试验方法 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

完了，如果支持的话，请加分顶一下，大家互相学习吗。

看不懂...顶一下.